DOUBLE ACTION VALVES
We use only the best double action valves which make our pool tubes super easy and quick to inflate and deflate....no need to squash them down! They deflate without any effort.
Our luxe floats are constructed from thicker (we haven't found any thicker) non toxic environmentally friendly PVC for a longer lasting float.
All of our floats are our own original designs which have been influenced by home styling and current trends. Each summer we strive to create newness and that must have new summer collection.
OVERSIZED POOL TUBES
Oversized float Pool tubes aren't just for kids to enjoy, our oversized floats are 130cm in diameter (deflated) making them suitable for 12+
KIDS POOL TUBE
Suitable for 6+, 90cm diameter (deflated)
Inflations and set-up:
Step 1:Unfold and lay your float on a flat surface, clear of any sharp objects that could puncture your float.
Step 2:Fully open all air chambers.
Step 3:Using an inflation device, inflate each chamber. Dual-action valves: inflate and deflate in a matter of minutes! Ensure all dual-action valves are open and pulled out of the float body Insert black mid-valve into the clear valve base. Ensure black mid-valve is fully inserted. Insert any standard inflation device into the black mid-valve, hold firmly and inflate.
Tip: Insert a hair dryer (COLD AIR ONLY) directly into clear valve base to inflate!
Important Inflation Notes: Inflate your &SUNDAY float slowly until most of the wrinkles in the float material are gone. Please note, there will still be wrinkles on the float when fully inflated, do not over-inflate to attempt to remove the wrinkles.
When inflated, the air chambers feel firm to the touch. Do not over-inflate until hard. We recommend a foot pump or electric inflatable air mattress pump to inflate your float.Do not use air compressors or compressed air to inflate. Use of an air compressor or over-inflation can rupture the product beyond repair and voids any warranty.
Important Air Temperature Notes: Changes in air temperature will cause air to expand or contract. This can cause serious damage to your float.
Please use caution when leaving your float in direct sunlight as the sun will heat the float and cause the air to expand. You may need to release air from your float if your float is hot. Conversely, you may need to add air to your float when in-contact with cold water or if left outside overnight.
Deflation: Dual action valve: Simply pull the entire valve out of the float body and air will escape the float.
Maintenance: Your float with last with proper maintenance. After each use, please remove from the water and rinse with fresh water. Ensure float is completely dry. Deflate until flat, fold and store.
Repair: &SUNDAY floats are made with extra thick material to ensure the best floating experience. If your &SUNDAY float is punctured, identify the puncture location. We recommend patching the leak with the patch included in the &SUNDAY box. When deflated, clean the float around the puncture and ensure the area is completely dry. Peel the clear repair patch and apply directly over the puncture. Press firmly and smooth to set the repair patch to the float.
If your float has a slow leak, inflate your float one more time and ensure all the valves are fully closed.
Store: Store your deflated &SUNDAY float in a cool, dry place with no UV exposure to protect against sun damage.